Showing posts with label conifers. Show all posts
Showing posts with label conifers. Show all posts

Tuesday, 7 May 2019

Castle Rock - Final




It's a month since I started this at a SAQA workshop at Crieff and while it took a few days to get back to it once I was home, it's done.
Now I have to lay it aside a week for other matters. When I do get back to finishing the quilting, I don't expect the image itself will change at all.

Saturday, 4 May 2019

Castle Rock - Day 16

It took the morning to stitch down all the foliage at the bottom. I was going to net it but at the last minute I took it off and stitched the leaves individually.

The trunks were thread painted, and finally this afternoon I started on the canopy of the forest.
Another day should do it.



Friday, 3 May 2019

Castle Rock - Day 15

Even I have a breaking point.
I spent several hours this morning (as well as countless hours before) making fern and bracken fronds. Then.............I hit the wall.
Enough already!

So I took six charm squares I had set aside, cut them all up and literally threw them at the bottom.
All assembled. 😁



What's next?
Before the final quilting I need to thread paint the large trees, the add fine branch work on the horizon....and a little more diddly stuff as I come to it.
See you on the other side.

Wednesday, 1 May 2019

Tuesday, 30 April 2019

Castle Rock - Day 12

The remaining foreground was 'softened' with cheesecloth.
I increased the size of the moss coloured log. Now it needs to be hidden with moss and ferns.
All the large trees were stitched down and a 8 inch (construction size) conifer added to the right and trees/shrubs to the left and right.



Sunday, 28 April 2019

Castle Rock - Day 11

Now construction has moved to the lower half and the middle ground I need to jump around. It's easier to finish a section, left, middle, right.
I added colour to all? the trees. Most are only pinned. As some would receive more direct light at different times of the day I tried to show this with colour on the boles of the tree.

The hoop stitched trees were all destined for the right side. At this point it's wasted effort to hoop construct and not know what is going to cover your work.




Tree height and planned exposure suggests the colour.


These two group sit on the right, partially in shade, under one trunk, over two and tight against another.

.

Friday, 26 April 2019

Castle Rock -Day 9

The morning was spent tacking down all the vegetation I made yesterday and today.

Then I played with the Big trees.


Wednesday, 24 April 2019

Castle Rock - Day 7

Another half day here, but I managed to complete the two side pieces.
Each is group (2+) of evergreens accompanied by shrubs. Different thread and fabric colours are how I'm changing the light.

The first photos are the raw work with the solvy still on. The backside give a better idea of the contructions overlays.




After it was washed, dried and cut apart, the two sides are pinned into place.




Sunday, 21 April 2019

Castle Rock - Day 6

This long Easter weekend was a good time to catch up on things and sleep...and energy.

Wednesday past I drove to Orillia from Guelph and gave two talks to two different guilds, the Orillia Quilters Guilt and the Evening Thread Quilt Guild. I had a great time and they certainly asked a lot of really meaty questions.

I didn't get into my hotel bed until well after 10 pm. Where as I thought I had slept, my energy level put me on the couch as soon as I arrived back home. I basically stayed there until Friday afternoon. The rain just encouraged me to spend Saturday there as well. I fit in a little Easter baking and read a good book.
Finally, today, Sunday I was back.

But after catching up on things around here I was left with only half a day.
But I wanted to try something I'd been thinking about. Getting it out of my head always lets me sleep better.

In order to save time, materials and lower my frustration levels I thought I'd combine constructing deciduous shrubs and evergreens with solvy and netting.


 Materials on the netting then overlaid with solvey for stitching


This piece of netting is actually very large, the width of the landscape and about a long. I will continue to layer the deciduous materials and the conifer stitching overlay, at least for about 6in+ down the piece.


I don't intend to remove the solvey until I go to attach it to the landscape. This does interfere with trying to get useful photos but...

Saturday, 13 April 2019

Castle Rock Forest

I spent two days on this at a SAQA retreat in Crieff. It seems like I have little to show but I know how these things progress......Slowly.

I'm combining 3 images for this new forest scene. One is a ruddy forest image, and two photos. I want more colour in the piece and I want something tangible in the back ground other than fuzzy light..


Castle Rock BC
 

I spent almost a whole day assembling the Mountain that will all but disappear in the background.


Another day, the first of many assembling TREES........ and I'm on my way with this new piece.


Trees Trees Trees ......tomorrow

Wednesday, 23 January 2019

Mountain Tree - Final

Living on the Edge


In the end I heavily cropped this piece.
This brings the trees forward
20x40 in.

Friday, 18 January 2019

Mountain Tree - Day 7

Found the time to get back to this one.

A few dilemmas here. I ran out of the the very white batting I used for the large snow drifts and can't remember where I sourced it. I auditioned a few items included velvet and cotton balls and in the end went with the whitest batting I had. Most of the snow lodged in the trees will be hidden but.... I find things like that very annoying. The worst part was I lost a couple of days.

Noe that I'm working the remaining two major trees things have slowed down even more. Almost every branch is done as an individual and they are placed in a trial and error manner. While this method is very effective and useful...it is slow.


Wednesday, 9 January 2019

Mountain Pine - Day 5?

Well into this New Year I can turn my attention fo a while to our sentinel Pine on the cliff edge.

While the pieces seem to be large as I work them in the 6 inch and 8 inch  hoops, they disappear into the scene with surprising regularity. But none of the branches are particularly robust. They are survivors, stunted and gnarled.




Sunday, 6 January 2019

Mountain Pine - Catching up

Christmas isn't quite over for our household yet. We have one more round of family this coming weekend.
I'm fortunate in one way that it has been so spread out this year as I spent the week after Christmas in bed with whatever illness caught up with me.
Now that I'm back on my feet, (sort of), I finished the background rocks of the Pine and today placed the first of the trees.

But I have to put it all aside again as I need to finish a present for the weekend and next week is when all 8 pieces of the CQA piece will be brought together.
So I may bounce around for the next few posts.

Here's where I ended this afternoon with our mountain scene.
The first of the trees was made of about twenty separate pieces. That's how this fellow is going to go. More work and much more waste as each branch is truly custom.


Tuesday, 11 December 2018

Chekamus Canyon River - Day 15

Detail takes time.
With other commitments later, this was a short day.
All these sections were assembled off the canvas: a sandwich of 'solvy' over tulle, washed and trimmed before stitching to the scene.


Two separate pieces here clearly defined by colour.


Three pieces...2 saplings over a bush.


Every day the shrubbery creeps over the rock face.

Friday, 7 December 2018

Chekamus Canyon River - Day 12

A lot more deciduous foliage is assembled and stitched........................


and then covered with thick evergreen boughs in two colours.



Saturday, 1 December 2018

Chekamus River Canyon - Day 6

After evaluating the increasing distortion in this piece I decided it was time to add batting and backing. The piece was moving because my stabilizer was tearing minutely and stretching in spots. This was from the repeated pinning and repining to the design wall and putting it through my machine.
So now it should remain straight, There is still a bit of wowing in the river but that will disappear when I finish that section....last.

Again working on the right side, I defined rock formations with stitching and added a number of trees.
As the trees get larger and are designed for specific spots, the work gets slower.



Thursday, 29 November 2018

Chekamus River Canyon - Day 4

Moved forward by two hill slopes this morning.


The whole picture puts it all in perspective.


I think I"ll shift to the other side for awhile.